tristan860
Member
We are changing from an old Eurotherm drive to an AB753 and I have a few questions.
Seems like the 753 has less I/O's on Port 0 in comparison to the Eurotherm Port. Can we still wire directly or do we need extra ports?
Do we need to change our program inside the PLC since most of the programming was on Eurotherm drive itself?
I attached a picture of how the Eurotherm was wired.
Thanks in advance, Everything seems way different.
Seems like the 753 has less I/O's on Port 0 in comparison to the Eurotherm Port. Can we still wire directly or do we need extra ports?
Do we need to change our program inside the PLC since most of the programming was on Eurotherm drive itself?
I attached a picture of how the Eurotherm was wired.
Thanks in advance, Everything seems way different.