Hi, I just got a series 90 30 PLC and am trying to connect it to my laptop.
I have the cheater cable connected to a USBtoRS232 into my laptop.
I have checked all pinouts and all looks good, also the LED'S on the PLC all look fine PWR,OK and RUN are green.
Have tried VersaPro and the SerialCommTest program to no avail, all my com settings seem to be fine also.
Could the problem be the USBtoRS232 adapter cable?
and might i need to just get the RS485 to USB adapter instead or could the problem be the PLC itself.
Any help would be greatly appreciated
I have the cheater cable connected to a USBtoRS232 into my laptop.
I have checked all pinouts and all looks good, also the LED'S on the PLC all look fine PWR,OK and RUN are green.
Have tried VersaPro and the SerialCommTest program to no avail, all my com settings seem to be fine also.
Could the problem be the USBtoRS232 adapter cable?
and might i need to just get the RS485 to USB adapter instead or could the problem be the PLC itself.
Any help would be greatly appreciated