I am trying to connect a GOT1000 HMI to a Wago 750-881 PLC using the TCP MODBUS driver but can't read the registers
I'm using 20 registers from %MD0 in the Wago and have tried to read from 40001 in the HMI but nothing
Note, when I try this on an E1100 HMI reading from 1:MW1 it works OK
Any ideas ?
Regards
I'm using 20 registers from %MD0 in the Wago and have tried to read from 40001 in the HMI but nothing
Note, when I try this on an E1100 HMI reading from 1:MW1 it works OK
Any ideas ?
Regards