Heya everyone thanks for reading im stuck with a project im doing at work and cant find the problem
I have an mitsubishi FX3U system connected to a E1032 beijer HMI
to the FX3U i have a pulse sensor connected to X0, I run a highspeed counter and a highspeed compare but by the looks of it the high speed compare doesnt react when the value is reached
Also I got 1.865 pulses/mm but the PLC doesnt seem to accept commas? or do I have the wrong format on the register?
Pictures either below or attached, not really used to posting here yet and once again thanks so much for reading this thread
I have an mitsubishi FX3U system connected to a E1032 beijer HMI
to the FX3U i have a pulse sensor connected to X0, I run a highspeed counter and a highspeed compare but by the looks of it the high speed compare doesnt react when the value is reached
Also I got 1.865 pulses/mm but the PLC doesnt seem to accept commas? or do I have the wrong format on the register?
Pictures either below or attached, not really used to posting here yet and once again thanks so much for reading this thread