Hi friends;
I use a APU 300 frequency module. Configured as TYPE A counter. The application as under
Magnetic pickup signal came into the FTV(which chnage the sinewave into squuare wave) and connected to module.
I read the documentation and found 16 status register %I. I want to check if wire open or FTV malfunctioning which %I i used in the logic.
%I1 to 4 for strobe status
%I5 to 8 for preload status
%I9 to 12 for output status.
%I13 module status
%I 16 error.
Actually i want to use its %Q crossponding to the %AI.
I want when error occur crossponding output %Q set to false.
Regards
I use a APU 300 frequency module. Configured as TYPE A counter. The application as under
Magnetic pickup signal came into the FTV(which chnage the sinewave into squuare wave) and connected to module.
I read the documentation and found 16 status register %I. I want to check if wire open or FTV malfunctioning which %I i used in the logic.
%I1 to 4 for strobe status
%I5 to 8 for preload status
%I9 to 12 for output status.
%I13 module status
%I 16 error.
Actually i want to use its %Q crossponding to the %AI.
I want when error occur crossponding output %Q set to false.
Regards