ManG
Member
Hi Guys!
Could some one please help out here!
I had to change a failing four-wire silo level probe at work.
I found that the spare at my disposal is a two-wire vega probe.
The analog card is configured for four-wire inputs.
I would like to use the same card's slot for my two-wired probe.
Please advise , how should I go about this one without having to change the card's cofiguration, as this will,presumably, affect other instruments( four-wire) already connected to the card.
I would be grateful for assistance.
Regards
Man G
Could some one please help out here!
I had to change a failing four-wire silo level probe at work.
I found that the spare at my disposal is a two-wire vega probe.
The analog card is configured for four-wire inputs.
I would like to use the same card's slot for my two-wired probe.
Please advise , how should I go about this one without having to change the card's cofiguration, as this will,presumably, affect other instruments( four-wire) already connected to the card.
I would be grateful for assistance.
Regards
Man G