SirScott
Member
I have a micrologix 1100 and I need to extract characters from a string data type and store the ascii values for each character in an integer type data table space. I was able to do this in a 5/03 processor, but the micrologix 1100 doesn't support the direct addressing of characters in the string like in the 5/03.
in the 5/03 for example, I would use the following instruction.
MOV #ST118:0.DATA[1] N119:11
One of you experts have a method I can use in the Micrologix 1100?
Thanks in advance,
in the 5/03 for example, I would use the following instruction.
MOV #ST118:0.DATA[1] N119:11
One of you experts have a method I can use in the Micrologix 1100?
Thanks in advance,