naseer.449
Member
We have emersion plc E10. i have downloaded the software CONTROLSTAR ..
I have prepared the cable to communicate, it is accepting with a baud rate of 9600 with COM port,,
But when am trying to upload the program from PLC it is not coming???
Can any one help me in this regard,,
LITTLE URGENT>>>
I have attached the cable diagram..
I have prepared the cable to communicate, it is accepting with a baud rate of 9600 with COM port,,
But when am trying to upload the program from PLC it is not coming???
Can any one help me in this regard,,
LITTLE URGENT>>>
I have attached the cable diagram..