how write comparison on twido telemecanique

jim-garcia

Member
Join Date
Oct 2003
Location
Reynosa
Posts
42
hello everybody!!!!!!

how can I write a comparison for a counter on twido telemecanique plc
my counter is the c0 ,
I try to turn on the internal realy m0 when the counter is 1
and the internal relay when the counter is 2

can someone help me

thank's to all
[email protected]
 

Similar Topics

Hello, I am fairly experienced programming and modifying existing FTView ME programs. I have also used FTView SE to make modifications to a...
Replies
5
Views
113
Hi I have a ifix 5.5 application where the operator opens a valve by clicking on a screen object. I can trace from object to data base that it is...
Replies
2
Views
61
Hi everyone, I hope you're all doing well. I'm currently working on updating an HMI project for the GP2500, and I've encountered a bit of a...
Replies
1
Views
128
I've gotten to the learning curve where I can program a call for pump to come on at set point but I'm not sure how to turn the same pump off when...
Replies
1
Views
155
Hi everyone, I am working on a project that needs to expose the SV (Set Value) of a temperature controller to a SCADA system. SCADA <-...
Replies
4
Views
186
Back
Top Bottom