go_bears
Member
I am having faults on my Kinetix 6500 servo drives that read Safety Module Communication Error. The system consists of a 1756-L73S Version 20 Processor and a 1756-EN2TR/B Version 5.28. The network has powerflex 40Ps and 1734-AENTRs on it. The Kinetix modules are 2094-EN02D-M01-SO Version 2.18. It has one rack with 4 Axis. There are 7 powerFlex 40ps and 7 1734-AENTR racks on the this system.
The issue will come and go. we had the same issue back in March 2017. We then updated all the versions on the 2094s and the AENTRs. Now the problem has returned. We have similar machines that run the same componets that will have the issues also.
To reset the fault we either have to cycle control power or reset the module from RS5000.
Just wondering if anybody else has this same issue.
Thanks
The issue will come and go. we had the same issue back in March 2017. We then updated all the versions on the 2094s and the AENTRs. Now the problem has returned. We have similar machines that run the same componets that will have the issues also.
To reset the fault we either have to cycle control power or reset the module from RS5000.
Just wondering if anybody else has this same issue.
Thanks