Kv300 Cpu

tsellers

Member
T
Join Date
Feb 2006
Location
Iowa
Posts
1
I have a KV300 CPU that the RUN/ERROR light flashes alternately red and then green. I can't upload from or download to the device. I get a communications error message when attempting to do either. The laptop and communication cable both work fine when communicating to other KV300 modules. Is the KV300 simply trashed or can this issue be overcome?
 
Last edited:

Similar Topics

U
kv300 I/O question
Hi, I ran into this problem and would appreciate very much if someone can help. I have a KV300 with the KV-R1 I/O distribution module, KV-R16X...
Replies
0
Views
3,091
Unregistered
U
A
CJ1M CPU 11 communication with NS10-TV01b-V2
Hello every one hope all are enjoying. I have an issue to connect omron NS10 HMI with CJ1M-CPU11 ETN plc I have made all required setting as...
Replies
1
Views
24
DarrylR
D
E
How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Hi, How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Replies
1
Views
56
parky
P
J
90/30 CPU Upload
I have a 90/30 CPU331. I am trying to upload the program out of the CPU and keep getting an error uploading the logic. Error 8262: Error...
Replies
6
Views
123
James_TC
J
H
Siemens CPU 317-2DP Firmware Version V2.1.8
Hello, I have a CPU 317-2DP Firmware Version V2.1.8. In TIA Portal only V2.6 is available, and there is no option to upgrade FW. Then I open it...
Replies
14
Views
328
JesperMP
JesperMP
Back
Top Bottom