cbcX
Member
I have a Maple Systems HMI5100T talking to an S7-200 CPU 226 through a Cp-243-1 Ethernet module. The two systems talk just fine however when I attempt an ethernet connection to the PLC from a PC running Micro/WIN programming software, I cannot connect until I unplug the HMI and wait approx 1 minute. IP addresses are as follows:
HMI: 192.168.0.201
PLC: 192.168.0.211
PC: 192.168.0.150
This is a very strange issue and I was wondering if anyone else had seen it.
HMI: 192.168.0.201
PLC: 192.168.0.211
PC: 192.168.0.150
This is a very strange issue and I was wondering if anyone else had seen it.