jarodl
Member
I have two PLC programs running in RSLogix Emulate 5, and I am trying to set up a message command so that one PLC can read data from the other PLC. When I opened the programs in Emulate, I chose address 1 for the first program, and address 2 for the second program, and that's how they are showing up in RSLinx Classic. When I set up the message command in PLC #1, under "This PLC-5", I choose "PLC-5 Typed Read", Data Table Address "N9:6", and Size In Elements "4". Under "Target Device" I choose Data Table Address "N7:31", Local Station Address "2", and "Local".
I am getting an unknown error of 80, and the data isn't transferring. I can see the message command executing once per second in the program, so I know it's running.
I have a feeling my "Target Device" settings are incorrect. Should I have it set to "Local", and should I be using the address (2) that I selected when I opened the program in Emulate?
I am getting an unknown error of 80, and the data isn't transferring. I can see the message command executing once per second in the program, so I know it's running.
I have a feeling my "Target Device" settings are incorrect. Should I have it set to "Local", and should I be using the address (2) that I selected when I opened the program in Emulate?