mitsubishi and modems

maxy123

Member
M
Join Date
Oct 2003
Posts
3
Hi
I have successfully remotely connected to a mitsubishi FX PLC via a mitsubishi modem at both ends.
I now wish to use a US Robotics at the PC end but whilst it will dial out and connect to the mitsubishi modem I am unable to get the GX developer to talk to the PLC
Any suggestions would be appreciated
Regards
maxy123
 

Similar Topics

T
Modems with Mitsubishi
I understand it is possible to use a modem with a Mitsubishi E series HMI that will enable it to send alarms/reports via email. Presumably the...
Replies
2
Views
6,069
jim5
J
E
How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Hi, How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Replies
1
Views
62
parky
P
K
Mitsubishi F800 Control Via Ethernet IP
So the customer purchased a Mitsubishi drive, in the same project for a different pump they got an ABB drive, was literally whatever they could...
Replies
1
Views
79
kdean94
K
C
AOI to Mitsubishi FB?
hi all, I'm wondering if anyone has ever converted an Allen Bradley AOI to a Mitsubishi Function block. I's hard to find libraries from...
Replies
3
Views
183
parky
P
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
201
NicoSz
N
Back
Top Bottom