Mitsubishi Q00UJCPU communicate with HMI through RS232C

CKLiang

Member
C
Join Date
Dec 2018
Location
Selangor
Posts
1
Hi, is that anyone know the pin layout for the communication cable from Mitsubishi Q00UJCPU (6 pin mini) to any Schneider HMIGXU (D sub 9) through RS232c (because the PLC is use RS232C)? because i ady try many way of connection, but still cannot. attachment image is three way i had try, but not sure is that anyone can work or not.

WhatsApp Image 2018-12-23 at 10.18.50 AM.jpeg WhatsApp Image 2018-12-22 at 11.04.34 AM.jpeg WhatsApp Image 2018-12-22 at 12.47.45 AM.jpeg
 

Similar Topics

E
How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Hi, How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Replies
1
Views
52
parky
P
K
Mitsubishi F800 Control Via Ethernet IP
So the customer purchased a Mitsubishi drive, in the same project for a different pump they got an ABB drive, was literally whatever they could...
Replies
1
Views
71
kdean94
K
C
AOI to Mitsubishi FB?
hi all, I'm wondering if anyone has ever converted an Allen Bradley AOI to a Mitsubishi Function block. I's hard to find libraries from...
Replies
3
Views
178
parky
P
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
195
NicoSz
N
S
MITSUBISHI ALPHA AL2-24MR-D Controller
Hello! If someone can help me with the following problem. I can't change the phone number. Do I really need the interface (AL-232CAB - Programming...
Replies
0
Views
80
soro4gsm
S
Back
Top Bottom