Hi everyone,
I have a few coil registers on my Modicon program that I need to put into a 40000 o 30000 registers, because I'm upgrading the panel (an old xycom 2060 to a MP277 siemens), and the new panel can't access but the 4x and 3x registers and I have some info on registers on the order of 298 988, 703...etc, can anyone tell me what would be the most accurate way of doing it, I was thinking on just moving the registers, example move 988 to 42191, but I don't think thats a really good idea, what I need is just to see if those addresses are active or not.
Thanks
Juan
I have a few coil registers on my Modicon program that I need to put into a 40000 o 30000 registers, because I'm upgrading the panel (an old xycom 2060 to a MP277 siemens), and the new panel can't access but the 4x and 3x registers and I have some info on registers on the order of 298 988, 703...etc, can anyone tell me what would be the most accurate way of doing it, I was thinking on just moving the registers, example move 988 to 42191, but I don't think thats a really good idea, what I need is just to see if those addresses are active or not.
Thanks
Juan