modicon m238 configuration

Robert_M

Member
R
Join Date
Dec 2010
Location
Wichita,KS
Posts
23
Hello,
i am trying to program a Modicon M238LDA24DR. I have the software loaded and I have connected to the PLC with a usb to mini usb cable for programming. I don't seem to be able to setup the communication path correctly. I have read the manuals and I can find the communication setup menu, but for some reason I cannot establish comms. This is my first experience with the Modicon (I am fluent with A-B and Siemens). Could someone help me out please! Thank you for any help at all.
 
When you plug in the USB cable at PLC and laptop end, there will be a popup message to install USB driver. Did you clicked next, next and installed the USB driver?
 

Similar Topics

EICS
Modicon M238 PLC & Magelis HMI - What software Needed ?
I am looking at a bakery oven that has been dismantled and in storage for unknown time, it was manufactured in 2012 so not that old. my gig is to...
Replies
8
Views
3,663
EICS
EICS
ControlSystems
Schneider Modicon M221 & Machine Expert Basic Programming Application
Hello All, I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
Replies
4
Views
187
Lare
L
TheWaterboy
Modicon Micro84
A lifetime ago I built a couple systems with Modicon Micro84 controllers that are still running. But today one of those died and they reached out...
Replies
2
Views
97
TheWaterboy
TheWaterboy
K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
108
[email protected]
K
V
Modicon Quantum PLC instruction questions
Hello All, Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
Replies
6
Views
318
Lare
L
Back
Top Bottom