Prizm_Controls
Member
Good Morning All,*
I have a NOM 212 00 card that I plan on using to talk to 3 Multilin 369's that are Daisy Chained on a 2 wire 485 network. Obviously I will need a 232 to 485 converter as the NOM card Modbus port only utilizes RS 232. I am fairly new to the Modicon world but not to Modbus. I am basically after what function blocks in Proworx 32 a person would use to set up that port and pick and choose registers. Would it be as simple as an MSTR instruction? or what about the XMIT instruction? Any help would be appreciated!*
I have a NOM 212 00 card that I plan on using to talk to 3 Multilin 369's that are Daisy Chained on a 2 wire 485 network. Obviously I will need a 232 to 485 converter as the NOM card Modbus port only utilizes RS 232. I am fairly new to the Modicon world but not to Modbus. I am basically after what function blocks in Proworx 32 a person would use to set up that port and pick and choose registers. Would it be as simple as an MSTR instruction? or what about the XMIT instruction? Any help would be appreciated!*