ronaldmerritt21
Member
Hello everyone: I am new in the world of PLC's and I would like some help on writing a program using a ton timer with sw1,sw2 and two mov command's. so could someone help me.
Move instruction with timer
- Thread starter ronaldmerritt21
- Start date
TheWaterboy
Lifetime Supporting Member + Moderator
Yes we can help you with homework. but you have to put forth SOME effort. Make an attempt and post it.
maxketcham
Lifetime Supporting Member
Here you go, just as you specified: a timer, 2 switches, and 2 MOV instructions.
However you forgot to mention what it is supposed to DO. Again, it is exactly as you specified.
Similar Topics
I want to change my vision system program using a micrologix plc. The vision system uses binary inputs, bits 0 thru 7 to determine program #. I...
Hi All,
I am using 2 MOVE instructions in Studio 5000 logic designer to move 2 different values in the same destination tag N7[190]. Two...
Hi
I'm working with twdlmda20drt and i was wondering if there is a move instruction in twidosuite cause i cant find it and i may need in the...
Hi all
I currently have a system where data is scanned into a system and in the fc is a move instruction which I move a '00' on the input and...
Hey I'm new to rs logic 5000 I have the basics but I'm getting confused with this mvm instruction. Can anybody bum it down for pls
Thanx in advance