Zohaib Shabir Member Z Join Date May 2018 Location Pakistan Posts 2 May 27, 2018 #1 Hi, Can anyone tell the authentication password of Murphy S1501 Mirco-Controller for Configuration?
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 May 27, 2018 #2 http://www.ignition-service.com/Murphy/Compressor_Controls/S1501/Install.pdf I would contact the original programmer of the equipment or contact the manufacturer. Regards,
http://www.ignition-service.com/Murphy/Compressor_Controls/S1501/Install.pdf I would contact the original programmer of the equipment or contact the manufacturer. Regards,
Zohaib Shabir Member OP Z Join Date May 2018 Location Pakistan Posts 2 May 27, 2018 #3 glcshortt Thanks for your reply. I have already this manual. But they did not mention in this manual about any password. Thanks again.
glcshortt Thanks for your reply. I have already this manual. But they did not mention in this manual about any password. Thanks again.