mrsenolsezer
Member
- Join Date
- Dec 2004
- Posts
- 49
Hi guys we are constructing a small production line 5 km away from our factory that includes hydrolic presses and small machines.
We want to get info for production details in Excel, when machine started to work when stopped and how much it produced ...
So i've a sensor on every machine's output and it'll count in a siemens plc.
I made a simple move, got a S7-200 cpu224 and Pc Access software tried in my office, result is;
- I can get connected with RS232/PPI cable
- I can get counter data very well in Excel
- I can't get real time exactly in Excel; year is ok. but hour and minute is always make difference, i set it with microwin but nothing changed.
Now ı connect to plc in my office but how should i connect it 5 km away?
i couldn't find any document about PcAccess that describes ethernet connection.
So can you just give me advices or documents about PcAccess, S7-200 real time clock and ethernet connection of PcAccess and Cpu.
If anyone uses that system please tell me which modules, software are you using and how did you program it?
We want to get info for production details in Excel, when machine started to work when stopped and how much it produced ...
So i've a sensor on every machine's output and it'll count in a siemens plc.
I made a simple move, got a S7-200 cpu224 and Pc Access software tried in my office, result is;
- I can get connected with RS232/PPI cable
- I can get counter data very well in Excel
- I can't get real time exactly in Excel; year is ok. but hour and minute is always make difference, i set it with microwin but nothing changed.
Now ı connect to plc in my office but how should i connect it 5 km away?
i couldn't find any document about PcAccess that describes ethernet connection.
So can you just give me advices or documents about PcAccess, S7-200 real time clock and ethernet connection of PcAccess and Cpu.
If anyone uses that system please tell me which modules, software are you using and how did you program it?