NovaTech D3 question

FGB is a Function Generator Block.

If the input is X1, the output is Y1, etc.
If the input is between 2 successive X values, linear interpolation is used to assign the output.
 

Similar Topics

C
NovaTech D/3 Process Automation System ?
I was curious if anyone out there has any experience with the D/3 system? I really know very little about it. What type of programming language...
Replies
3
Views
3,366
Sheldn
S
L
Question marks on every textbox of my aplication
I recently uploaded an aplication from a Panel View, created a new screen and now that I've downloaded it to the Panel View, all the texts have...
Replies
9
Views
165
LuisK_GB
L
P
Siemens 6ES7331-7KF02-OABO Wiring Question
I have never had the pleasure of working with a "Thermistor" until now and have a question. The Thermistor is a 10KOhm 4-20mA 2-wire device and I...
Replies
4
Views
144
parness45
P
P
JSR Execution Question
Hi All, So I have a main routine with an instruction that's executed by XIC "Run" I have a JSR located on a rung below it. In the logic for that...
Replies
6
Views
244
patrickmoneyy
P
O
AB 1769- L30 Input Card Question
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Replies
1
Views
108
joseph_e2
J
Back
Top Bottom