Eric Nelson
Lifetime Supporting Member + Moderator
You know who you are...
My customer has an old cartoner run by an Omron S6 (3G2S6-CPU15), with two ID-411 input modules, and two OC-221 output modules. Still working!...
These are the PLCs I started with, and I know I still have my PRO16 programming console around somewhere, but haven't found it yet...
I did find some other fun stuff though: A PRO15 and PRO27 console, and even an S3D-P (and manual!) for the little S3 PLCs...
Anyway, the customer wants to 'upgrade' the machine to a CLX (I will convince them a ML is sufficient), so I would love to get the existing program out of the ol' S6.
I haven't finished digging, but in the event I don't find my programming console, I just wanted to see if anyone here still has one I could borrow. I would cover shipping. There are a few on eBay, but I can't justify buying one for this single job.
-Eric
My customer has an old cartoner run by an Omron S6 (3G2S6-CPU15), with two ID-411 input modules, and two OC-221 output modules. Still working!...
These are the PLCs I started with, and I know I still have my PRO16 programming console around somewhere, but haven't found it yet...
I did find some other fun stuff though: A PRO15 and PRO27 console, and even an S3D-P (and manual!) for the little S3 PLCs...
Anyway, the customer wants to 'upgrade' the machine to a CLX (I will convince them a ML is sufficient), so I would love to get the existing program out of the ol' S6.
I haven't finished digging, but in the event I don't find my programming console, I just wanted to see if anyone here still has one I could borrow. I would cover shipping. There are a few on eBay, but I can't justify buying one for this single job.
-Eric