OMRON C200HW-PRM21 communication cable

kalabdel

Member
K
Join Date
Feb 2015
Location
Ontario
Posts
1,108
Hello guys,

I need to change the configuration on an C200HW-PRM21
PROFIBUS-DP Master Unit and looking communication cable. Any one knows where to get one? Is there another way to configure the module or is this the only way?


Thanks
 

Similar Topics

S
omron c200hw-drm21-v1 problem
need help, Hi i'm new. My deviceNet master drm21-v1 show an error, E2, then the whole system will power off. The power supply come back...
Replies
1
Views
2,767
Jay Anthony
Jay Anthony
R
Omron device net fault
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
Replies
2
Views
95
alan_505
A
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
84
IO_Rack
IO_Rack
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
214
BobB
BobB
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
86
IO_Rack
IO_Rack
Back
Top Bottom