dYoast
Lifetime Supporting Member
Hello to all. I have been reading the forum for a bit, but I did not see a specific post for my question.
I am working on integrating some Siemens PLCs into Cimplicity Plant Edition. After looking at the GE Fanuc forum, I though I would try for a good opinion here.
I have looked at Kepware and Applicom. I would prefer to have a software based solution to avoid problems with hardware updates and also enable the use of a laptop.
Please give some opinions on OPC Servers.
Thanks.
I am working on integrating some Siemens PLCs into Cimplicity Plant Edition. After looking at the GE Fanuc forum, I though I would try for a good opinion here.
I have looked at Kepware and Applicom. I would prefer to have a software based solution to avoid problems with hardware updates and also enable the use of a laptop.
Please give some opinions on OPC Servers.
Thanks.