I am currently trying to run my Rslink,s thru a panel view 900 to a AB plc 5/02. Using only a serial cable with RS 232 connections then a serial to usb adapter into my lap top. I have use this set up on AB plc 5/04 and up with no problems. But havent been able to get it to work thru the panel view. Have made a new Rs 232 cable with all connections going straight thru. But wondering what drivers configuration I should use. Started with the Rs-232 driver type. Then to configure it. Used com 1 with the SLC0CHO/micro/Panelview. Then tried auto-config but with no luck. Is there a step I am missing. Or will this set up not work at all.
Ok thanks for the help.
Ok thanks for the help.