Panelview 5510 load tag value from USB

mp91

Member
M
Join Date
Jun 2019
Location
.
Posts
63
Hi all,

I have a new panelview 5510. I would like to be able to read in data from an excel file on a usb/sd card and then update tags in the connected controller.

Can't see any information about how to access the usb/sd at all. Any one done anything like this?

Thanks
 
I believe you will only be able to do this on the controller's memory card, not the PanelView's.

KnowledgeBase article 28539 covers this, access level TechConnect.
 

Similar Topics

ryangriggs
PanelView 5510: How to enable VNC on startup
Hello, I am dealing with a AB PanelView 5510 device which needs to be accessible via VNC (local only, NO internet access!). To enable the VNC...
Replies
8
Views
2,125
JasonWade
J
S
Panelview 5510 address change
So we had a new skid come in with the wrong IP address incorporated. :shoot: CompactLogix with a 5510 Panelview. I have both projects uploaded...
Replies
8
Views
2,509
stretch_af
S
A
Panelview 5510 Alarm History
Since there is no alarm history kept once a fault or ALARMD is acknowledged, what is a good way to maintain a history via logic? FFL?
Replies
4
Views
2,485
MKinsman
M
D
Panelview 1000e to Panelview plus 7 (std) conversion
I’m running short on time to complete this project (retirement looming), so thought I’d ask here hopefully save me some research time. I’m...
Replies
7
Views
121
Ken Roach
Ken Roach
C
Panelview Plus 7 Help
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
7
Views
191
chall234
C
Back
Top Bottom