myke2480 said:
im having trouble with a pv plus 1000 touch with keypad. cant access config screen. no white square, F1 doesnt work, left and right direction buttons dont work, USB keyboard ctrl-shift-alt-windows buttons dont work. i am just trying to upload .mer file.
myke2480,
Hi and Welcome to the Forum!
Something the members have posted above might get you sorted, or has already gotten you sorted out. But for future reference, it is better to post up the full catalog number for the assembled PanelView Plus HMI terminal. This way we can be sure that what you are calling it is indeed correct and that the advice provided may be more specific to the actual model of terminal you are using.
JasonTheSparky,
On a similar note: as we do not know for certain which type of PanelView Plus 1000 is being used here (older PVP, newer PVP 6 or PVP 7?), we need to be careful with not confusing the situation. The info you've posted up contains references to...
Special BOOT Action --> Safe Mode
This is specific to the newer model terminal menus (PVP 6/7) and is not present in the older PanelView Plus 1000.
Also, the link in your post is for a PanelView Plus 6 model, which again is possibly not correct here, "if" an older model terminal is being used.
If the catalog number is provided we can then be more sure which advice to dispense. Granted, usually when I see just "panelview plus 1000" or similar in these threads, I do tend to think they mean the older models. But it is still better to be sure, isn't it?
Regards,
George