m_ghaff2000
Member
- Join Date
- Mar 2005
- Posts
- 10
hello
I am facing a problem! we have a TSX17 old telemecanique PLC on a machine
the machine was off for a several years so the PLC battery has been lost.
PLC has a eeprom .
Now I have installed a new battery but the RUN and MEM lights on PLC blink
according TSX17 Manual , memory initializing should be done
I cannot find how I can initilize the memory
I have TL7-2 DOS software but I cannot initialing procidure in this softwre
Please help me
THANKS
I am facing a problem! we have a TSX17 old telemecanique PLC on a machine
the machine was off for a several years so the PLC battery has been lost.
PLC has a eeprom .
Now I have installed a new battery but the RUN and MEM lights on PLC blink
according TSX17 Manual , memory initializing should be done
I cannot find how I can initilize the memory
I have TL7-2 DOS software but I cannot initialing procidure in this softwre
Please help me
THANKS