vishaldev Member V Join Date Dec 2020 Location Ludhiana Posts 1 Feb 16, 2021 #1 How to write frequency to Powerflex 755 drive using ethernet? I want to give frequency command to powerflex 755 through studio 5000.
How to write frequency to Powerflex 755 drive using ethernet? I want to give frequency command to powerflex 755 through studio 5000.
willxfmr Lifetime Supporting Member Join Date Nov 2013 Location Wisconsin Posts 466 Feb 16, 2021 #2 If all the hardware is set up correctly, you just have to move the desired speed into the tag for speed reference.
If all the hardware is set up correctly, you just have to move the desired speed into the tag for speed reference.
mylespetro Member Join Date Dec 2015 Location NS Posts 741 Feb 17, 2021 #3 I think you'll probably have to set Parameter 545 (Spd Ref A Sel) to come from the network.
_Dock_ Member D Join Date Sep 2015 Location KY Posts 508 Feb 17, 2021 #4 Use the startup wizard it will walk you through all the questions.
James Mcquade Member J Join Date Oct 2007 Location Nashville, Tennessee area Posts 3,695 Feb 17, 2021 #5 Welcome to the forum. dock, please explain how to get to the wizard. james
_Dock_ Member D Join Date Sep 2015 Location KY Posts 508 Feb 17, 2021 #6 James, See page 41 of this manual. https://literature.rockwellautomati...re/documents/at/drives-at004_-en-p.pdf#page40
James, See page 41 of this manual. https://literature.rockwellautomati...re/documents/at/drives-at004_-en-p.pdf#page40