Hamburgers
Member
Hello,
I recently changed the IP address of a Compactlogix L32E and an asssociated Panelview 1000. I can ping both of them so I know that the IP addresses have been changed. My problem is that the Panelview is not able to communicate with the Compactlogix. I am an amateur when it comes to Rockwell Automation so I don't know what to try next. I have read that I may need to use Factory Talk Studio to create a new device shortcut to the controller. Does anybody know if it a required step to use Factory Talk Studio to create a new shortcut? I changed the IP address of the controller using RSLinx and RSlogix5000. I changed the IP address of the Panelview using the Terminal Settings on the panel. Any help is appreciated. Thanks!
I recently changed the IP address of a Compactlogix L32E and an asssociated Panelview 1000. I can ping both of them so I know that the IP addresses have been changed. My problem is that the Panelview is not able to communicate with the Compactlogix. I am an amateur when it comes to Rockwell Automation so I don't know what to try next. I have read that I may need to use Factory Talk Studio to create a new device shortcut to the controller. Does anybody know if it a required step to use Factory Talk Studio to create a new shortcut? I changed the IP address of the controller using RSLinx and RSlogix5000. I changed the IP address of the Panelview using the Terminal Settings on the panel. Any help is appreciated. Thanks!