Hello,
I face with a problem when I try to getting online to CPU 315-2dp (315-2ag10-0ab0-V2.0.8) using Step7 V5.4.
I can upload OBs,FBs,FCs,...but when I try upload Hardware an error window appears with following content and upload breaked:
2000) error while uploading the the configuration to the programming device (PG). Do you want to continue?
and then when I click the help button ; help on massage 13 : 77 appears
Please be informed that
- the CPU is still running without any faults
- hardware catalog is updated
- there is not any special module with to be configurd with configuration CDs.
- PG/PC interface is ok
- there is a Diagnostics Repeater with an error on DP2 .( the PLC works without any faults)
I have tried to upload hardware with HwConfig too but the same errors taked place. Also I tried to change PG/PC setting but in all correct ones the same error existed.
I have checked "Which meaning have the error codes (xxxx:yyyy) in STEP 7" http://support.automation.siemens.com/WW/view/en/770453 . it contains follwings:
TEXT : While interpreting the system data blocks
(SDBs) uploaded from the module, an error
was recognized in the programming device and
processing halted.
CAUSE : Inconsistent HW configuration in module, occurs when previous
loading of SDBs into the module was incomplete or faulty.
REMEDY : ??????
Then what I shall do if previous loading of SDBs into the module would be incomplete or faulty?
Does exist any way?
I face with a problem when I try to getting online to CPU 315-2dp (315-2ag10-0ab0-V2.0.8) using Step7 V5.4.
I can upload OBs,FBs,FCs,...but when I try upload Hardware an error window appears with following content and upload breaked:
2000) error while uploading the the configuration to the programming device (PG). Do you want to continue?
and then when I click the help button ; help on massage 13 : 77 appears
Please be informed that
- the CPU is still running without any faults
- hardware catalog is updated
- there is not any special module with to be configurd with configuration CDs.
- PG/PC interface is ok
- there is a Diagnostics Repeater with an error on DP2 .( the PLC works without any faults)
I have tried to upload hardware with HwConfig too but the same errors taked place. Also I tried to change PG/PC setting but in all correct ones the same error existed.
I have checked "Which meaning have the error codes (xxxx:yyyy) in STEP 7" http://support.automation.siemens.com/WW/view/en/770453 . it contains follwings:
TEXT : While interpreting the system data blocks
(SDBs) uploaded from the module, an error
was recognized in the programming device and
processing halted.
CAUSE : Inconsistent HW configuration in module, occurs when previous
loading of SDBs into the module was incomplete or faulty.
REMEDY : ??????
Then what I shall do if previous loading of SDBs into the module would be incomplete or faulty?
Does exist any way?