Profisafe and safety plc

Werner

Member
Werner
Join Date
Apr 2005
Location
IJsselstein
Posts
336
Hi there!


Has anyone experience with emergency sensors on profibus? (ET200S with fail safe modules and S7-300F plc).

Good/bad?
Easy to use/complex nightmare?
 
Last edited:

Similar Topics

J
Profisafe on non-safety PLC?
Hello everybody, Does anybody knows if a conventional (non safety) siemens PLC, for example a S7-315 support the ProfiSafe protocol? I know it...
Replies
9
Views
4,467
JesperMP
JesperMP
D
problem with siemens profisafe safety module
Hi. I'm getting the following error on my PLC: "Faulty Module (diagnostic interrupt detected)" while online with the PLC, in the diagnostic...
Replies
12
Views
13,995
iant
iant
G
Profisafe F-host/safety controller options?
Does anybody know of low-cost alternatives to the Siemens F series of PLCs that can function as safety controllers on a profisafe network? I see...
Replies
1
Views
2,045
Timbert
Timbert
M
ISSUES ASSIGNING PROFISAFE ADDRESS TO SIEMENS ET200ECO PN IO MODULE
Hello everyone, I've had this issue for the last 2 days where I try to assign the profisafe address to an IO block (6ES7 146-6FF00-0AB0) but when...
Replies
5
Views
199
baref00t25
B
S
Profisafe between two S7-1200
Hello, I´m doing an exercise in safety and is using SENPDP and RCVDP to accomplish a safe connection between the two PLC:s. But I´m stuck at the...
Replies
2
Views
806
swedeleaner
S
Back
Top Bottom