electric101
Member
First of all i just took over support of a large operation and they use alot of different AB HMI's ... the regional mgr wants me to upgrade firmware and make some changes to the interface. I've done alot with some proprietary HMI's but i dont know alot about allen bradleys.
so first of all can i make changes to versaview 1500P, panelview plus 1000, and panelview 550 using panelbuilder32?
or do i need a different application for each?
the 550 are smaller lower quality units but the panelview plus 1000 and the versa view 1500P look about the same just glancing from the outside.... but from what i've read the versa view is actually a PC correct?
any info that could be helpful would be appreciated.
so first of all can i make changes to versaview 1500P, panelview plus 1000, and panelview 550 using panelbuilder32?
or do i need a different application for each?
the 550 are smaller lower quality units but the panelview plus 1000 and the versa view 1500P look about the same just glancing from the outside.... but from what i've read the versa view is actually a PC correct?
any info that could be helpful would be appreciated.