Rockwell 558x major non recoverable fault (MNRF)

pegla00

Member
Join Date
Jul 2015
Location
Toronto
Posts
10
Hi All,

Recently, while working with brand new 558x processors (L81E and L81ES), I saw on initial program download that both PLCs generated MNRF.

Prior to download, both programs compiled with no errors and warnings. In both programs initial CPU was the Emulator V30.

After re-creating programs from scratch with correct CPUs, downloads were successful and no minor or major faults were issued since.

Has anybody had similar situation?
 
I don't know if it applies to you but I believe I read where there were an/some issues with V30.011 in those and it was recommended to flash them to V30.014 or maybe V31.
 

Similar Topics

Background for the question: A service man from a sub-supplier has made changes onsite to a Siemens PLC and HMI program. He has not made a backup...
Replies
7
Views
300
Hello all, I am an Industrial Electrician, and deal with a little bit of everything including PLC troubleshooting and programming. When I started...
Replies
3
Views
177
I am working on a large migration of the standard PID instruction to the PlantPAx P_PIDE. Has anyone done a migration like this before and have a...
Replies
1
Views
181
Hi all. What is the purpose of that block (MVM) when used with a 2#1111_1111_1111_1111 mask in that situation? I'm really hoping there is...
Replies
5
Views
181
Customer is adding an extension rack to an existing A22. They wired and powered it up, I configured the new cards in the PLC starting from slot 23...
Replies
4
Views
162
Back
Top Bottom