Rockwell RAC6182 not booting

navicom

Member
N
Join Date
Jul 2006
Location
Dubai
Posts
1
Hi Friends

I have a RAC6182 - Touchpanel with Window CE 3.0 not booting.
Power is ok. Unit responds in Debug mode when J2 put in 1-2.
connected a Terminal on COM2, getting garbadge. I tried all
baud rate but no meanning full data. I got recovery CD, hope
that once i install OS on PC cards, system may boot with PC card
as DOC may be corrupted. Anyone can help me to recover this
Rockwell RAC6182.
 

Similar Topics

JesperMP
Can you upload the program from a Rockwell operator panel ?
Background for the question: A service man from a sub-supplier has made changes onsite to a Siemens PLC and HMI program. He has not made a backup...
Replies
5
Views
116
plvlce
P
B
Installing Rockwell Software
Hello all, I am an Industrial Electrician, and deal with a little bit of everything including PLC troubleshooting and programming. When I started...
Replies
3
Views
154
Operaghost
Operaghost
F
Rockwell PID to P_PIDE
I am working on a large migration of the standard PID instruction to the PlantPAx P_PIDE. Has anyone done a migration like this before and have a...
Replies
1
Views
166
FriedNickman
F
dalporto
Rockwell MVM Block
Hi all. What is the purpose of that block (MVM) when used with a 2#1111_1111_1111_1111 mask in that situation? I'm really hoping there is...
Replies
5
Views
172
drbitboy
drbitboy
K
Rockwell 1719 A24 Extension Rack
Customer is adding an extension rack to an existing A22. They wired and powered it up, I configured the new cards in the PLC starting from slot 23...
Replies
4
Views
151
JeffKiper
JeffKiper
Back
Top Bottom