RSLinxCP.exe
Scooter;
If you got that PIC_DH485 stopped and deleted, look for a program called RSLINXCP.EXE in the same folder as RSLinx's. If you double click it, it brings up the control panel for RSLinx. Click stop if RSLinx is still running and uncheck the "Always run as service box" at next boot up RSLinx should not startup on its own.
Larry
p.s. Sometimes we have a VERY hard time shuting down the driver. If you shutdown RSLinx, disconnect from the PLC then restart RSLinx it will usually allow you to stop and delete the driver.
Scooter;
If you got that PIC_DH485 stopped and deleted, look for a program called RSLINXCP.EXE in the same folder as RSLinx's. If you double click it, it brings up the control panel for RSLinx. Click stop if RSLinx is still running and uncheck the "Always run as service box" at next boot up RSLinx should not startup on its own.
Larry
p.s. Sometimes we have a VERY hard time shuting down the driver. If you shutdown RSLinx, disconnect from the PLC then restart RSLinx it will usually allow you to stop and delete the driver.