In RSLogix500, is there a way to make B3:1/1 to show as B3:0/16? In the below drawing with keyboard letters, --II-- is a rung with a normally open contact.
You will not see B3:0/16 but you can see (using Dravik's configuration) B3/16 (word 0 only has 16 bits 0-15 B3:0/16 is not a valid address)
which is the same a B3:1/0
I am pretty sure that B3:1/1 is actually B3:0/17, and it will display as B3/17, but assuming that [B3:0/16] is a typo on the OP's part, Dravik's answer still stands: