Hal9000 Member H Join Date Jun 2010 Location London Posts 140 Dec 3, 2012 #1 Dear all, Does anybody know if it is possible to read the add-on instruction, major and minor revision attributes as a Tag? (as entered in the General Tab). I would like to show this history information on my HMI. regards, JD
Dear all, Does anybody know if it is possible to read the add-on instruction, major and minor revision attributes as a Tag? (as entered in the General Tab). I would like to show this history information on my HMI. regards, JD
MichaelG Member M Join Date Nov 2006 Location Brisbane Posts 691 Dec 3, 2012 #2 Yes the GSV instruction Attributes available LastEditDate MajorRevision MinorRevision Name RevisionExtendedText SafetySignatureID SignatureID Vendor See manual for more details
Yes the GSV instruction Attributes available LastEditDate MajorRevision MinorRevision Name RevisionExtendedText SafetySignatureID SignatureID Vendor See manual for more details
bernie_carlton Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Yakima, Washington Posts 6,413 Dec 3, 2012 #3 It looks like REV 18 is the first that allowed GSV for an Add-On Instruction. Just a note.
MichaelG Member M Join Date Nov 2006 Location Brisbane Posts 691 Dec 3, 2012 #4 bernie_carlton said: It looks like REV 18 is the first that allowed GSV for an Add-On Instruction. Just a note. Click to expand... Good catch - used to using rev 19+ - did not even think about the older revs
bernie_carlton said: It looks like REV 18 is the first that allowed GSV for an Add-On Instruction. Just a note. Click to expand... Good catch - used to using rev 19+ - did not even think about the older revs
Hal9000 Member OP H Join Date Jun 2010 Location London Posts 140 Dec 4, 2012 #5 Thanks Guy's, Looks like I need to rev up, I'm still on antique version V17! Thanks again