RSLogix5000 Unique FIFO

OOPer

Member
O
Join Date
Jun 2011
Location
CA
Posts
35
How do I make sure that I only push Unique elements into my FIFO (or I guess into an array)? Should I just write an AOI that loops through the array and confirms that the new element doesn't previously exist?
 

Similar Topics

N
RSLogix5000 --> C-More HMI; Array --> Text String
Hello everyone, Wondering if anybody can help me with this: I have a CompactLogix processor running a little robot cell. Every 200 cycles...
Replies
8
Views
186
nutcase511
N
N
RSLogix5000 Software Install
Hi! So my problem is a little funky, I had Studio 5000 v 24 and 30 installed, but forgot to install RSLogix (which I cannot go without). Is there...
Replies
2
Views
180
NewPLCuser2024
N
R
Odd request RSLogix5000 - Send 80 character string from One PLC to another with I/O
So I had an odd request from a customer for the above. I have written the logic and tested it all in one PLC with only using 7 outputs and 7...
2
Replies
15
Views
487
drbitboy
drbitboy
B
Adding emulator PLC to existing RSLogix5000 project
Hello everyone, I have an RSLogix5000 project which is running live in the factory but I need to make some changes to the logic. I want to test...
Replies
0
Views
1,152
BlindeBandiet
B
G
RsLogix5000 GSV Variable
Good Morning Everyone, I'm looking to use the GSV instruction to get I/O fault codes for my project so I know if there's a comms issue in my E/IP...
Replies
5
Views
910
JeremyM
JeremyM
Back
Top Bottom