Hello all,
I have a Siemens 1200 plc which I am trying to get to communicate with a schnieder atv320 inverter with a profinet card. I have the atv320 in the tia portal project with the name and up all set, I have the correct name and up set in the inverter and can ping it all ok. If I do a search for accessible devices on tia portal it can see it but the plc can’t? I have been through the schnieder profinet manual and can’t see any thing, I have seen a video on the internet which seems to show something being added to the plc in the device configuration but can’t see why and it’s all in German unfortunately. Can anyone help? I don’t usually use schnieder inverters so this is a new problem.
Thanks
In advance.
I have a Siemens 1200 plc which I am trying to get to communicate with a schnieder atv320 inverter with a profinet card. I have the atv320 in the tia portal project with the name and up all set, I have the correct name and up set in the inverter and can ping it all ok. If I do a search for accessible devices on tia portal it can see it but the plc can’t? I have been through the schnieder profinet manual and can’t see any thing, I have seen a video on the internet which seems to show something being added to the plc in the device configuration but can’t see why and it’s all in German unfortunately. Can anyone help? I don’t usually use schnieder inverters so this is a new problem.
Thanks
In advance.