tomwhite007_2008
Member
I am just learning S7 and STL. So please forgive me if this sounds basic. I am using a CPU 416F-2 PLC.
I have a counter and it increments once everytime "M_10.1" is true. I set my Preset to that counter to 5 when "M_10.3" is true. Why does my counter continue to increase past 5? I am not really sure the purpose of the Preset! Thanks for your response.
A "M_10.1"
CU C 1
A "M_10.2"
CD C 1
A M 10.3
L C#5
S C 1
A M 10.4
R C 1
L C 1
T MW 12
I have a counter and it increments once everytime "M_10.1" is true. I set my Preset to that counter to 5 when "M_10.3" is true. Why does my counter continue to increase past 5? I am not really sure the purpose of the Preset! Thanks for your response.
A "M_10.1"
CU C 1
A "M_10.2"
CD C 1
A M 10.3
L C#5
S C 1
A M 10.4
R C 1
L C 1
T MW 12