boros000
Member
Hello all,
I have to prepare one memory MAP for a future SCADA system.
My machine will be placed somewhere on the Earth, probably without internet connection.
The customer asked me, to prepare a memory map and a list with all the parameters for a future scada project.
The machine has 3 CPUs wired with Profibus. In the future the hole plant will be wired via Profibus.
On one of the CPUs I will prepare a DB with all the inputs and outputs.
I will use 10,11,12 profibus addresses.
At commissioning I will give them this DB's MAP and the address list what I have used (10,11,12).
What do you think? Are these informations enough to connect my machine to a future SCADA?
Do I have to set up something special in the communication?
Thank you.
I have to prepare one memory MAP for a future SCADA system.
My machine will be placed somewhere on the Earth, probably without internet connection.
The customer asked me, to prepare a memory map and a list with all the parameters for a future scada project.
The machine has 3 CPUs wired with Profibus. In the future the hole plant will be wired via Profibus.
On one of the CPUs I will prepare a DB with all the inputs and outputs.
I will use 10,11,12 profibus addresses.
At commissioning I will give them this DB's MAP and the address list what I have used (10,11,12).
What do you think? Are these informations enough to connect my machine to a future SCADA?
Do I have to set up something special in the communication?
Thank you.