Schneider PacDrive3 communication with Beijer HMI

jagjag1

Member
J
Join Date
Jan 2012
Location
Codesys
Posts
17
I'm having problem connecting my Beijer IX T7E via Ethernet to my Schneider PacDrive3 (c201). I have defined the ARTI protocol for the communication. But I'm a bit unsure if the byte order is motorola or intel. Even the Ethernet protocol version should be useful.

If anyone have tried and succeeded with the communication between any Beijer HMI and a pacdrive 3 controller please share.
 

Similar Topics

M
Schneider Pacdrive3 servo control
Hello everybody, I have tried to search on the google and in Somachine help, But I still haven't found any explanation how to start with servo...
Replies
4
Views
3,137
xuanbantran
X
M
MICROLOGIX 1400 to Schneider PM800 Powermeter through rs485 no comm
hi to all, have anyone tried to communicate Schneider PM800 to a ML1400 through rs485? i am having an issue with it just receiving message...
Replies
1
Views
56
MiLo28
M
ControlSystems
Schneider Modicon M221 & Machine Expert Basic Programming Application
Hello All, I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
Replies
4
Views
189
Lare
L
R
Schneider Control Expert Multiple Monitors
Hi, Is Control Expert V15.0 supposed to support multiple monitors? I'm running Control Expert V15.0 on my host Windows 11 PC, connected to two...
Replies
1
Views
94
dalporto
dalporto
K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
108
[email protected]
K
Back
Top Bottom