Holmzy
Member
I am having trouble sending a ascii string of information from
an Omron PLC to a PLC 5\40.
I am connected to channel 0 and the PLC is configured User Ascii
and I made up a cable based on the info from Omron and AB.
I connected with Hyperterminal and confirmed that data is being
sent from the Omron PLC but when I connect the cable to the PLC5
I do not get the same info.
Can anyone comment or has anyone done this before.
an Omron PLC to a PLC 5\40.
I am connected to channel 0 and the PLC is configured User Ascii
and I made up a cable based on the info from Omron and AB.
I connected with Hyperterminal and confirmed that data is being
sent from the Omron PLC but when I connect the cable to the PLC5
I do not get the same info.
Can anyone comment or has anyone done this before.