poormonkey
Member
I need some assistance to any Siemens Gurus' who can help me convert the following from STL to Lad. I have tried all the old tricks I can remember from along time ago, but in Step 7 V13, I can't seem to get it to convert STL to FBD or LAD I read some where in the forum that this isn't possible any more. Thanks for the help...
A "MachineOptions_DB".SECOND_REJECT_ENB;
A(;
O "Faults_DB".VTPG_FLT_REJECT_VER;
O;
A "MachineOptions_DB".SECOND_REJECT_FAULT;
A "MACH_RUN";
A(;
L "MachineOptions_DB".SEC_REJ_PITCHES;
L 0;
>I;
);
A(;
L "MachineOptions_DB".REJ_PITCHES_ACCUM;
L "MachineOptions_DB".SEC_REJ_PITCHES;
<=I;
);
);
= %L6.0;
A %L6.0;
A(;
L %DB1.DBB1;
L 0;
==I;
);
= "SEC_REJ_BLOW1";
A %L6.0;
A(;
L "MachineOptions_DB".REJ_PITCHES_ACCUM;
L "MachineOptions_DB".SEC_REJ_PITCHES;
>I;
);
R "MachineOptions_DB".SECOND_REJECT_FAULT;
A "MachineOptions_DB".SECOND_REJECT_ENB;
A(;
O "Faults_DB".VTPG_FLT_REJECT_VER;
O;
A "MachineOptions_DB".SECOND_REJECT_FAULT;
A "MACH_RUN";
A(;
L "MachineOptions_DB".SEC_REJ_PITCHES;
L 0;
>I;
);
A(;
L "MachineOptions_DB".REJ_PITCHES_ACCUM;
L "MachineOptions_DB".SEC_REJ_PITCHES;
<=I;
);
);
= %L6.0;
A %L6.0;
A(;
L %DB1.DBB1;
L 0;
==I;
);
= "SEC_REJ_BLOW1";
A %L6.0;
A(;
L "MachineOptions_DB".REJ_PITCHES_ACCUM;
L "MachineOptions_DB".SEC_REJ_PITCHES;
>I;
);
R "MachineOptions_DB".SECOND_REJECT_FAULT;