Dear friends.
We are using s7 400 plcs,during commissioning time data sending /receiving from one plc to another was established through server(ETHER NET FC60&FC50)its working fine.Now i want to communicate another plc which is already in same server.I already try to send data though(FC50,60)by changing the job id but data was not sending, error showing either net connection not established but while accessing connected node that CP also detecting.Is it possible to send or receive data from all detected node(cps).
We are using s7 400 plcs,during commissioning time data sending /receiving from one plc to another was established through server(ETHER NET FC60&FC50)its working fine.Now i want to communicate another plc which is already in same server.I already try to send data though(FC50,60)by changing the job id but data was not sending, error showing either net connection not established but while accessing connected node that CP also detecting.Is it possible to send or receive data from all detected node(cps).