I am having trouble converting the following STL to ladder. It seems basic enough, but I have not used STL very long. I have seen other conversions where people just change some Ands to Ors and add )'s here and there. With a conversion, could someone also explain how and when this is necessary?
O(
A "M 0334.0"
A "DB330.DBX14.4"
AN "DB329.DBX0.2"
AN "DB329.DBX4.3"
)
O "M 0334.1"
A "DB366.DBX4.3"
AN(
A "DB27.DBX3.6"
A "DB330.DBX0.1
)
= "Q53.6"
O(
A "M 0334.0"
A "DB330.DBX14.4"
AN "DB329.DBX0.2"
AN "DB329.DBX4.3"
)
O "M 0334.1"
A "DB366.DBX4.3"
AN(
A "DB27.DBX3.6"
A "DB330.DBX0.1
)
= "Q53.6"