[FONT="]Can test SFC51 to read LED status with PLCSIM? I will used 315-2-Dp and currently when I tested with PLCSIM, I only got LED ON bit at Index W#16#0004 with SSL ID W#16#0019 when PLCSIM is run and When PLCSIM stop, nothing changes as i don't have stop bit at Index w#16#0005. Could someone guide me out? I tried SSL ID W#16#0074 and return value got error 16#8082. [/FONT]
[FONT="]I have STRUCT my return Data Record at follow. [/FONT]
[FONT="]DR Struct[/FONT]
[FONT="]ID : word;[/FONT]
[FONT="]Led On : Byte;[/FONT]
[FONT="]Led Blink :Byte;[/FONT]
[FONT="]End Struct:[/FONT]
[FONT="]Is that right for SSL ID W#16#0019 too? I am confused with Siemens manual.[/FONT]
[FONT="]TIA,[/FONT]
[FONT="]
[/FONT]
[FONT="]I have STRUCT my return Data Record at follow. [/FONT]
[FONT="]DR Struct[/FONT]
[FONT="]ID : word;[/FONT]
[FONT="]Led On : Byte;[/FONT]
[FONT="]Led Blink :Byte;[/FONT]
[FONT="]End Struct:[/FONT]
[FONT="]Is that right for SSL ID W#16#0019 too? I am confused with Siemens manual.[/FONT]
[FONT="]TIA,[/FONT]
[FONT="]
[/FONT]