We have an OMRON SYSMAC C40K-CDR-A 2065C Programmable Controller with a blown out input channel #200.
All other inputs are free spares and functional.
The ladder program has input 200 in only two places in the program. I wish to edit the ladder program and reassign the 200 to say 207 and move the signal wire to 207 and be back in business.
Well, such a simple change is turning out to be very expensive. It looks like we need to buy a host link 3G2C7-LK201-EV1 for $800-$1000. For that much we can buy a modern day PLC and lose the Host Link, but would have to write the entire ladder over and debug.
From reading the posts here, It looks like a few of you guys/girls have this Host Link and are well skilled to edit this program. I can send the PLC via UPS and I have a hard copy of the ladder program marked up with the reassigned input number. If anyone is interested in making a quick modification for a fee, Please contact me with your charge and time line. We need to get this thing up and running.
Thanks
All other inputs are free spares and functional.
The ladder program has input 200 in only two places in the program. I wish to edit the ladder program and reassign the 200 to say 207 and move the signal wire to 207 and be back in business.
Well, such a simple change is turning out to be very expensive. It looks like we need to buy a host link 3G2C7-LK201-EV1 for $800-$1000. For that much we can buy a modern day PLC and lose the Host Link, but would have to write the entire ladder over and debug.
From reading the posts here, It looks like a few of you guys/girls have this Host Link and are well skilled to edit this program. I can send the PLC via UPS and I have a hard copy of the ladder program marked up with the reassigned input number. If anyone is interested in making a quick modification for a fee, Please contact me with your charge and time line. We need to get this thing up and running.
Thanks